[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Intel PRO/1000 MT Dual Port Server Adapter Issues



Hello All:
I'm having some issues w/an Intel PRO/1000 MT Dual Port Server Adapter
in an OBSD-3.7 firewall.  The card is in the pci-x riser on one of
these puppies;
<http://www.tyan.com/products/html/gt20b5151.html>
Dmesg complains the "The EEPROM Checksum Is Not Valid".  I've tested
the card in a Winblows machine and it works.  Any insights as to what
is going on here greatly appreciated.
Full dmesg follows:
OpenBSD 3.7 (GENERIC) #0: Fri Oct 14 03:11:48 MDT 2005
    [email protected]:/mnt/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20
GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,CNXT-
ID cpu0: Enhanced SpeedStep 1600 MHz (1388 mV): unknown EST cpu, no
changes possible real mem  = 1063755776 (1038824K) avail mem =
963338240 (940760K) using 4278 buffers containing 53288960 bytes
(52040K) of memory mainbus0 (root)
bios0 at mainbus0: AT/286+(ca) BIOS, date 05/13/05, BIOS32 rev. 0 @
0xfaee0 apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd6f4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd5a0/320 (18 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 19 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 5 7 10 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x9400! 0xef000/0x1000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
em0 at pci2 dev 3 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01:
irq 10em0: The EEPROM Checksum Is Not Valid em0: Unable to initialize
the hardware em1 at pci2 dev 3 function 1 "Intel PRO/1000MT DP
(82546EB)" rev 0x01: irq 15em1: The EEPROM Checksum Is Not Valid em1:
Unable to initialize the hardware vendor "Intel", unknown product
0x0326 (class system subclass interrupt, rev 0x09) at pci1 dev 0
function 1 not configured vga1 at pci0 dev 2 function 0 "Intel E7221
Video" rev 0x05: aperture at 0xfdf00000, size 0x8000000 wsdisplay0 at
vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added
(80x25, vt100 emulation) ppb2 at pci0 dev 28 function 0 "Intel 82801FB
PCIE" rev 0x03 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 1 "Intel
82801FB PCIE" rev 0x03 pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750 (0x4101): irq 5 address 00:e0:81:2f:f0:42 brgphy0 at bge0 phy
1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 28 function 2
"Intel 82801FB PCIE" rev 0x03 pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750 (0x4101): irq 10 address 00:e0:81:2f:f0:43 brgphy1 at bge1 phy
1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0
"Intel 82801FB USB" rev 0x03: irq 3 usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 15
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 3
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci6 at ppb5 bus 6
fxp0 at pci6 dev 2 function 0 "Intel 82557" rev 0x10, i82550: irq 7,
address 00:e0:81:2f:f0:08 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev.
4 pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at
atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM
SCR-242, CXAC> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode
4, Ultra-DMA mode 2 pciide0: no compatibility interrupt for use by
channel 1 pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev
0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI pciide1: using irq 15 for native-PCI interrupt wd0 at
pciide1 channel 0 drive 0: <HDT722525DLA380> wd0: 16-sector PIO, LBA48,
238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-
DMA mode 5 wd1 at pciide1 channel 1 drive 0: <HDT722525DLA380>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0 pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask efdd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
    SENSE KEY: Not Ready
     ASC/ASCQ: Medium Not Present
raid1 (root): (RAID Level 0) total number of sectors is 4227328 (2064
MB) raid0 (root): (RAID Level 1) total number of sectors is 485622912
(237120 MB) as root dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!
raid1: Device already configured!
TIA--
-- 
Best regards,
Ken Gunderson
Q: Because it reverses the logical flow of conversation.
A: Why is putting a reply at the top of the message frowned upon?