[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: wireless interface sharing same subnet as wired



On Mon, 10 Mar 2003, PF said:

> When you bridge interfaces they are consumed and not available for anything other than the bridge.


This is not correct.
I am currently using the setup described. dc0 is external, fxp0 is internal for nat for the private subnet (192.168.1.0). wi0 is bridged to fxp0.


dc0 = 64.81.x.x
fxp0 = 192.168.1.x
wi0 = no address (Linksys Prism II card in hostap mode)

wired and wireless clients all on 192.168.1.0/24


fxp0: flags=9943<UP,BROADCAST,RUNNING,,PROMISC,SIMPLEX,LINK0,MULTICAST> mtu 1500
address: 00:90:27:a4:c2:e1
media: Ethernet 100baseTX full-duplex
status: active
inet 192.168.1.254 netmask 0xffffff00 broadcast 192.168.1.255
bridge0: flags=41<UP,RUNNING> mtu 1500
wi0: flags=8943<UP,BROADCAST,RUNNING,,PROMISC,SIMPLEX,MULTICAST> mtu 1500
address: 00:06:25:52:39:03
nwid <not displayed>
nwkey <not displayed>
powersave off
media: IEEE802.11 DS11 hostap
status: active
bridge0: flags=41<UP,RUNNING>
Configuration:
priority 32768 hellotime 2 fwddelay 15 maxage 20
Interfaces:
fxp0 flags=3<LEARNING,DISCOVER>
port 2 priority 128
wi0 flags=3<LEARNING,DISCOVER>
port 14 priority 128
Addresses (max cache: 100, timeout: 240):
00:06:25:52:38:ee wi0 1 flags=0<>
00:d0:b7:db:8c:30 fxp0 1 flags=0<>
00:d0:b7:44:e8:f0 fxp0 1 flags=0<>
00:90:27:0b:84:2e fxp0 1 flags=0<>
00:a0:cc:5c:58:7d fxp0 0 flags=0<>
00:03:47:04:ff:17 fxp0 1 flags=0<>