[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cisco PIX 4-port 10/100 card in OpenBSD-current



Why are the Intel cards better than anything else?
How does Intel compare to the 3Com905C for instance?

Everyone claims that Intel is the thing, but haven't actualley seen any documentation on this yet.

At 19:31 25.02.2003, Srebrenko Sehic wrote:
For all you pf firewall builders. I just tried installing a Cisco 4-port
card (PIX-4FE; used in Cisco PIX firewalls) into my OpenBSD-current box
and guess what? It works like a charm, so I wanted to share it.
I know people often ask for this type of devices.

Interfaces are detected as separate fxp(4) cards (we all know how good
they are). Dmesg is below. I haven't had a chance to test it in detail,
but so far, they seem to work VERY good.

The PCI bus might turn out to be a bottleneck, though!

Dmesg is below.

// haver

OpenBSD 3.3-beta (GENERIC) #1: Thu Feb 20 18:12:15 CET 2003
root@hellspawn:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 451 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 268005376 (261724K)
avail mem = 242663424 (236976K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(06) BIOS, date 07/16/99, BIOS32 rev. 0 @ 0xf0690
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xd42
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0ca0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1543 PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x3000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1541 Host-PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "Acer Labs M5243 AGP/PCI-PCI" rev 0x04
pci1 at ppb0 bus 1
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 3 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Acer Labs M1543 PCI-ISA" rev 0xc3
adv0 at pci0 dev 9 function 0 "Advansys ABP-930/40UA" rev 0x02: irq 7
scsibus0 at adv0: 7 targets
ppb1 at pci0 dev 10 function 0 "DEC 21154 PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
fxp0 at pci2 dev 0 function 0 "Intel 82557" rev 0x05: irq 3, address 00:e0:b6:01:07:82
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
fxp1 at pci2 dev 1 function 0 "Intel 82557" rev 0x05: irq 7, address 00:e0:b6:01:07:81
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
fxp2 at pci2 dev 2 function 0 "Intel 82557" rev 0x05: irq 11, address 00:e0:b6:01:07:80
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 0
fxp3 at pci2 dev 3 function 0 "Intel 82557" rev 0x05: irq 10, address 00:e0:b6:01:07:7f
inphy3 at fxp3 phy 1: i82555 10/100 media interface, rev. 0
vga1 at pci0 dev 12 function 0 "Matrox MGA G200 PCI" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
eap0 at pci0 dev 13 function 0 "Ensoniq AudioPCI" rev 0x00: irq 7
audio0 at eap0
pciide0 at pci0 dev 15 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc1: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307045>
wd0: 16-sector PIO, LBA, 32253MB, 16383 cyl, 16 head, 63 sec, 66055244 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <IBM-DTTA-351010>
wd1: 16-sector PIO, LBA, 9671MB, 16383 cyl, 16 head, 63 sec, 19807200 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6402B, 1008> SCSI0 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c0c0 netmask ccc8 ttymask dcca
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302